Show pageOld revisionsBacklinksCopy this pageBack to top Old Revisions These are the older revisons of the current document. To revert to an old revision, select it from below, click Edit this page and save it. 2021/07/02 02:21 full_build_instructions – [Full Build Instructions (pi Stomp! 1.0.2)] admin +91 B (current) 2021/03/29 04:22 full_build_instructions – [Step #9: Install Board into Enclosure] admin +472 B 2020/11/23 19:53 full_build_instructions – [General Suggestions] admin +56 B 2020/10/24 05:09 full_build_instructions – external edit 127.0.0.1 ±0 B 2020/10/24 04:59 full_build_instructions – [Full Build Instructions (pi Stomp! 1.0.2)] admin +73 B 2020/10/24 03:32 full_build_instructions – [General Suggestions] admin +76 B 2020/10/24 03:31 full_build_instructions – [General Suggestions] admin +30 B 2020/10/24 03:29 full_build_instructions – [General Suggestions] admin +172 B 2020/10/24 03:21 full_build_instructions – [General Suggestions] admin +251 B 2020/10/24 03:16 full_build_instructions – [General Suggestions] admin +811 B 2020/10/24 02:59 full_build_instructions – [General Suggestions] admin +7 B 2020/10/24 02:55 full_build_instructions – [Full Build Instructions (pi Stomp! 1.0)] admin +2 B 2020/10/18 04:52 full_build_instructions – [Step #7: Installing Jacks] admin +73 B 2020/10/18 04:49 full_build_instructions – [Step #5: Install Remaining Headers] admin -23 B 2020/10/18 04:46 full_build_instructions – [Step #12: Plug in the Pi] admin +1 B 2020/10/18 04:45 full_build_instructions – [Step #9: Install Board into Enclosure] admin -26 B 2020/10/18 04:42 full_build_instructions – [Step #8: Add Standoffs and Daughter Boards] admin +2 B 2020/10/18 04:40 full_build_instructions – [Step #7: Installing Jacks] admin +2 B 2020/10/18 04:38 full_build_instructions – [Step #6: Install Pots and Encoders] admin +1 B 2020/10/17 20:15 full_build_instructions – [Step #5: Install Remaining Headers] admin -3 B Show differences between selected revisionsless recent >> full_build_instructions.txt Last modified: 2021/07/02 02:21by admin